Doggy Tape Dispenser

Model TD1 is prepared to fit a steel blade-saw like this one: https://www.amazon.es/gp/product/B0CD8YWD2Q/ref=ox_sc_saved_image_1?smid=AHP4NSCWH5R9U&psc=1

or https://www.amazon.com/Replaceable-Blades-IDHM-Packing-Dispensers/dp/B0CDC1J6YY/

With version TD1 you will have to screw directly into the plastic, as the holes might have different spacing depending on your blade.

Model TD2 works with a printed blade made of PLA. Print this part in 0.12mm layer height. (PLA blade can be glued or screwed) 

 You will just need a screw (WS) 3,5 x 25 mm for the movable lid and 2 short screws 3,5 x 10 mm for the blade (better if you cut these two screws shorter to 7 or 8 mm).

Tape dispenser body is ready to be printed together with the rod (you’ll have to remove the support between the body and the rod, but it’s quite easy)

Printing settings:

• 0.2mm layer height
• Support: tree slim/threshold angle 20 (but with Normal Snug works too)
• 15 % density infill
• 6 top shell layers

If you want to support this project, you can donate here: https://ko-fi.com/casaprint3d

Remember that this file is for personal use only - Commercial licenses are available in our Patreon

Happy printing!