troy dgfpv 3inch fpv frame

buymeacoffee.com/dgfpv

little 3d printable 3inch fpv frame.

you need:

• 25.5x25.5 flight controller (min 15a)
• walksnail 1s vtx
• 1404 motors
• 3inch propellers
• 4x 22 or 25mm m2 stack screws (depending on your stack high)
• 12x 6mm m2 screws
• rubberbands
• 3s/4s 500-800mah
• "nano" elrs rx

no fancy “build guide .pdf” - i have kids :D… build instructions via pn as you like :).