Creality K1C Silicone Nozzle Cleaner Mod Easy Bed Plate Swap

finally got round to fitting this (edited)

I'm confused. This is my G-code. What exactly do I need to do? I have k1 max with cfs

START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]
T[initial_no_support_extruder]
M204 S2000
M104 S[nozzle_temperature_initial_layer]
G1 Z3 F600
M83
G92 E0
G1 Z1 F600 (edited)

I like the model and design. But it ends up being way too tall, resulting in my nozzle completely destroying the silicon brushes. I will have to swap it out with a new one.

Can we get a model that accommodates for damage?

Thank you!

Praktické

Przy zastosowaniu nieoryginalnej płyty w K1C jest to niezbędny element do wykonania.

Printed in PC will fit and test at some point but looks a great model and the best ive seen about that needs no fidling with as my k1 speedy has the wipe function already and found these on amazon also https://amzn.eu/d/dWc2P49 but can peel them of my current build plates too

Lovely design

Allows me to use funky double sided build plates from Temu! I peeled off the original pad from the build plate that came in the box and reused the existing glue

Ok, I found the following - it's for the CFS, but you get two of what you need:

 https://amzn.to/46DOjaE - or - https://amzn.to/42mn6H6

Just to be on the safe side, I am ordering both and also ordering the following:

 https://amzn.to/465wOQD - and - https://amzn.to/4gxxJgg

I'm printing the mold right now, so by the time Amazon delivers, it should be done... :)

Now - is that overkill? Probably, but either way I'll use it all up, and I know that I'll be able to use my K1C with the sticky plates. Thoughts?

Mines been in use long enough that my pads are getting torn up.
Surprised how much stuff gets left behind.

What's needed to use the mold? (edited)