Radiomaster Pocket - Internal mount for Ranger Micro

Mount a Ranger Micro PCB inside the Pocket CC2500 version, to get both ELRS and CC2500 without external modules!
7
21
0
677
updated March 13, 2024

Description

PDF

Hardware: 

  • For the bottom part:  M2 machine screws with 6-8mm length
  • For the top part I used self tapping M2.3 screws with 6mm length

Print settings:

  • Use supports for the overhang
  • I used PETG for the added heat resistance

Notes:

  • I recommend using the external antenna for elrs and adding an additional internal one for the cc2500.
  • Wire the ELRS module to the pins for the external module bay.
  • Don't forget to limit the power to 100mw, to prevent overheating or add a fan.
  • Use a small amount of hot glue or similar, to prevent strain from moving the antenna from pulling on the connector.
  • The case can be closed afterwards without interference.

Tags



Model origin

The author marked this model as their own original creation.

License