Ikea Skadis Pencil Cup Holder

Snap-in holder for DRÖNJÖNS Ikea pencil cup
34
47
0
691
updated March 13, 2024

Description

PDF

I wanted to add on to the Skadis system by coming up with a transparent container that

  1. I could easily + cheaply make
  2. Slide in/out instead of removing the whole assembly
  3. Looked nice

I realized then that Ikea has these “DRÖNJÖNS pencil cups for cheap and are a very good size. They don't have a lip, so figuring out a model that could hold them and allow for the cup to be easily removed was a bit tricky, but the result worked for me. I now use them almost exclusively. 

Note that the holes are matched to work with the excellent universal hooks found in the Ikea Skadis collections by CSD_Salzburg. You'll need two of them. 

Tips:

  • Use PLA or some similarly rigid material (I've included a slightly reinforced model if too loose)
  • 2-3 walls, 15% infill. Might want to increase if using more flexible filament. Total filament used should be around 60g. 

Tags



Model origin

The author marked this model as their own original creation.

License