Skadis Ikea Hook with Hoop

I have Designed this Skadis Hook with a Hoop for a friend who wanted to hang a test tube from the wall with a small plant inside from his IKEA Skadis wall.

The internal Diameter is 23mm

Print Settings:
- 0.2mm Strength (Others can be added but this gives the strongest hook) 

- Infill 100% for extra strength

- Tree Supports (Auto)

- Support Top Z Distance 0.24mm

- Print with hoop base on bed as shown in pictures

Approximately 33 minute print time (From a Bambu P1S)

Please feel free to leave feedback / comments for improvements or adaptations.