Flash Forge Adventurer M5 Pro Rear Spool Holder

I used 3 walls 20% infill gyroid pattern.

This will fit on the M5pro you have to rotate to fit it perfectly on the build plate.  Any longer and it wouldn't fit.

I reused one of the screws that came with the original spoolholder.  I wanted more strength so the second hole is a little thicker and I used a m3x12 screw for that hole.

https://www.amazon.com/Uxcell-a16011300ux0872-M3x12mm-Carbon-Countersunk/dp/B01E6EIC2S

You will need to download the following models:

https://www.thingiverse.com/thing:3020026/files

3DPNFilHoldGuide.stl

3DPNFilHoldRoller.stl

Or for a shorter roller

https://www.thingiverse.com/thing:5335512

You will also need two 608 bearings for the rollers. https://www.amazon.com/gp/product/B09PKD8QZZ

Modified to add the Flash Forge Adventurer M5 Pro rear spool holder mount.