Darth Vader Force Choke

Darth Vader's Force choke: a terrifying display of power, bending the will of foes with a mere gesture. A reminder that in the grip of darkness, there's no escape.

The design requires the following colors

• Black
• Dark Red
• Bright Red
• Light or Pastel Pink
• White

These are the filaments I've used

• R3D PLA Black
• Fillamentum ExtraFill PLA Purple Red
• Fillamentum ExtraFill PLA Traffic Red
• Bambu Lab PLA Matte Sakura Pink
• R3D PLA White

Box used to display the model (version Narrow 150x210)

• Single slot version
• Three slot version

Print instructions

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

• Start with Black
• At layer #7 (0.64mm) swap to Dark Red
• At layer #11 (0.96mm) swap to Bright Red
• At layer #15 (1.28mm) swap to Pastel Pink
• At layer #24 (2mm) swap to White for the rest.

No need for AMS or MMU. All color changes are done using filament swaps.

ALL The Crafty Maker designs are protected by Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or reproductions from those files. If you want a commercial license to LEGALLY SELL 3D prints, you'll need a The Crafty Seller subscription.