I saw this posted online and had to make one for myself! hope you enjoy!
Do not change the z scaling only the x and y!
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Basic Silver Transmission Distance: 0.5
PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #13 (1.12mm) swap to Gray
At layer #16 (1.36mm) swap to Silver
At layer #19 (1.6mm) swap to Jade White for the rest.
The author marked this model as their own original creation.