Made this for myself!
Do not change the z height but you can change the x and y by the same percentage.
I hope you enjoy!
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Matte Ice Blue Transmission Distance: 3.5
PLA BambuLab Basic Jade White Transmission Distance: 3
Swap Instructions:
Start with Black
At layer #14 (1.2mm) swap to Blue
At layer #17 (1.44mm) swap to Ice Blue
At layer #20 (1.68mm) swap to Jade White for the rest.
The author marked this model as their own original creation.