Powerbait Tower for Meiho fishing box

I designed this tower for holding powerbait and it attaches to a Meiho fishing tackel box.

I found it best to print the tower and clip seperately as it increases the strength of the clip by printing it on its side.

I use superglue or epoxy glue to attach the clip to the tower.

My printer settings:

Layer height 0.3mm

First layer height 0.2mm

Infill: 25% Cubic (Used for strength)

Material: PLA+ or PETG recommended

Supports: Printer dependant, I didnt need them on mine as I can print bridges quite well, some may need them and the pictures show where I recomend they are placed.