Xtool S1 Hose adapter 3" to 6"

Adapter for Xtool S1 (could fit other scenarios)
18
122
0
634
updated March 13, 2024

Description

PDF

\\\ Español

Estuve mirando por todas las webs y lo único que vi eran modelos de pago, aparte de no haber mucha variedad. 

La situación es la siguiente: adquirí un laser Xtool S1 pero vi que es necesaria la extracción de aire, se que la marca vende (no en España) un extractor pero la gente suele comprar el AC Infinity S4 / S6 pero era demasiado caro, por lo que compré en Amazon el siguiente modelo

Brogachy 150MM Extractor de Aire con Controlador PWM,684 m³/h

El problema viene en que la salida de aire del laser son 70 / 75 mm ( 3" ) y la entrada del extractor son 150 mm, por lo que toca diseñar algo ya que todos los modelos suelen ser de 75mm a 100mm y 100mm a 150mm

Estuve pensando si diseñarlo para la salida del laser (teniendo que usar una manguera de 150mm extra) o la entrada del extractor, por lo que para aprovechar la propia manguera que te viene en el laser decidí que fuera un “amplificador” para el extractor. Esto tambien estuve pensándolo durante bastante tiempo, basándome en las toberas / motores de los aviones o incluso el de la propia aspiradora para intentar ver que era mejor, si un tubo de 75mm o de 150mm.

Aunque se adapta bastante bien, recomiendo usar una abrazadera y poner cinta aislante (metálica o de la que tengas a mano) en ambos sitios para evitar que se pueda salir el humo o se pueda desprender el adaptador del tubo o de la manguera.

He añadido un reborde donde la manguera para intentar que se quede mas justo.

Es una pena que no haya más mods para este laser pero bueno, tiempo al tiempo.

**************************************

\\\ English

I was looking at all the websites and the only thing I saw were paid models, apart from not having much variety.

The situation is the following: I purchased an Xtool S1 laser but I saw that air extraction is necessary, I know that the brand sells (not in Spain) an extractor but people usually buy the AC Infinity S4 / S6 but it was too expensive, for what I bought on Amazon the following model

Brogachy 150MM Air Extractor with PWM Controller, 684 m³/h

The problem is that the laser air outlet is 70/75 mm (3") and the extractor inlet is 150 mm, so we have to design something since all models are usually 75mm to 100mm and 100mm to 150mm.

I was thinking about whether to design it for the laser output (having to use an extra 150mm hose) or the extractor inlet, so to take advantage of the hose that comes with the laser I decided to make it an “amplifier” for the extractor. I was also thinking about this for quite some time, based on the nozzles/motors of airplanes or even the vacuum cleaner itself to try to see which was better, a 75mm or 150mm tube.

Although it fits quite well, I recommend using a clamp and putting insulating tape (metal or whatever you have on hand) in both places to prevent smoke from escaping or the adapter from coming off the tube or hose.

I have added a lip to the hose to try to make it sit tighter.

It's a shame there aren't more mods for this laser but hey, time to time.

Tags



Model origin

The author marked this model as their own original creation.

License