FLEXI TOOTHLESS & LIGHT FURY

3D MODEL DESCRIPTION

Toothless & Light Fury from How To Train Your Dragon.

Fully articulated, highly flexible and strong joints.

Comes with both night and light fury painted 3mf files, the night fury is toothless, with his adapted tail fin. Also includes stl files for other slicers.

Similar in size too cloud jumper, but slightly smaller, I wanted an accurate night fury as possible but with the classic articulated style body, I hope you love them as much as I do.

3D PRINTING SETTINGS

Should be okay to scale up or down in size - for smaller bed sizes it's recommended that you increase the wall amount to compensate for strength.

layer height of 2.0 is fine but I printed my toothless in 0.18 without issues

3 walls (5 for silk)

0.3 wall thickness (0.42 is fine but less detail)

wall speed recommended maximum 90 mm/s

25% gyroid infill

no support or brim required

plenty of cooling for overhangs etc & everything else is as standard

Toothless painted print time - approx 10 hours.

Toothless & light fury unpainted print time - approx 5 - 6 hours.

Light fury painted print time - approx 6 hours.

Note this print times are for the included 3mf files and may vary depending on your selected printer/ settings.

Filament used in photographs are - Bambu labs - black onyx sparkle - lava grey carbon fibre & arctic whisper.

Any questions and I'll be happy to help, I hope you think he's cute - enjoy and follow for more )

get the full collection by joining my club, complete with commercial licence.