Neu gestaltete Mario Würfel Box / Newly designed Mario dice box
401
923
4
4034
updated March 12, 2024

Description

PDF

Beim Drucken ist darauf zu achten, dass die manuell hinzugefügten Stützen für die Aussparung der Fragezeichen für die Unterseite und den Deckel nicht verschoben werden. Dafür direkt nach dem Laden der STL je eine Gruppe: Würfel mit Stützen und Deckel mit Stützen zu machen. Danach können die Teile zusammen mit den Stützen ganz normal verschoben werden. Die Stützen sind notwendig um ein sauberes Druckbild der Aussparungen für die Fragezeichen zu erhalten.

Ich habe jeweils den Deckel, den Würfel und die Fragezeichen (6 Stück) separat gedruckt.

Bei mir hat das mit einer Schichthöhe von 0.30 gut funktioniert.

Dabei wurde der Würfel in 2,5 Stunden, der Deckel in 0.5 Stunden und die Fragezeichen in 1 Stunde und 10 Minuten gedruckt.

Filament (PETG) werden für den Würfel und Deckel 85g und für die Fragezeichen 28g benötigt.

Der Würfel ist so konstruiert, dass der Deckel nicht leicht zu entdecken ist. Er hält gut ist aber leicht zu öffnen indem man den Würfel mit dem Deckel nach unte kurz schüttelt oder mit dem Fingernagel an dem Fragezeichen zieht.

Habt Spaß damit, wenn's gefällt freue ich mich für einen Like

--------------------------

When printing, be careful not to move the manually added supports for the bottom and top question mark cutouts. To do this, immediately after loading the STL, make one group each: cubes with supports and lids with supports. The parts can then be moved together with the supports as normal. The supports are necessary to obtain a clean printed image of the recesses for the question marks.

I printed the lid, the cube and the question marks (6 pieces) separately.

This worked well for me with a layer height of 0.30.

The cube was printed in 2.5 hours, the lid in 0.5 hours and the question marks in 1 hour and 10 minutes.

Filament (PETG) requires 85g for the cube and lid and 28g for the question marks.

The cube is designed so that the lid is not easy to discover. It holds well but is easy to open by briefly shaking the cube with the lid facing down or pulling on the question mark with your fingernail.

Have fun with it, if you like it I'll be happy for a like

Tags



Model origin

The author remixed this model.

Printables
www.printables.com

Differences of the remix compared to the original

Neu konstruiert mit dünneren Wänden, Innenseite glatt und ohne Magnetverschluß.

Newly designed with thinner walls, smooth interior and no magnetic closure.

License