Wolfs howling - Hueforge - Filament Painting

Generated with img2go

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Sunlu Matte Black
PLA Sunlu Matte Dark Grey
PLA Elegoo Matte Grey
PLA Eryone Matte Light
PLA Eryone Matte White

Swap Instructions:
Start with Black
At layer #8 swap to Dark Gray
At layer #10 swap to Grey
At layer #12 swap to Light Grey
At layer #16 swap to White for the rest.

Use the .3mf file for exactly these filaments but change to what you've got in the slicer. For any other settings I used my thanks go to @Don Mantis because I used the same settings as for his art except the top and internal infill, there I use aligned rectilinear to get an even pattern all around.

Edit: Added the .stl file for anyone who has issues with slicing in PrusaSlicer with line 18.