Case for the USB-NeoHub by Olimex

Nice simple case for the USB-NeoHub by Olimex.

There are versions with and without a logo.

The two parts are a pretty tight fit and is probably a good friction-fit (depends on your settings and printer) but you can screw it together with 2 M3-screws (you can threat it by screwing in a M3-screw). You need two 3 mm screws of minimal 10 mm.

If you have a Bambu-printer, see https://makerworld.com/en/models/245362 for ready to print profiles.

Happy 8-bitting;

Category: Electronics