38mm_2mm_thick stem_silicone mold-single

Thanks for the leaf! I used it to create a mold, or tray, in which to cast silicone models of the leaf.

Using the same/original model as a hole, I can embed the silicone leaf in to other models, as shown in the first pic…hello, 3Dp meets silicone!

Each leaf is ~ 1/12 oz, so I combine in a 6- or 12-pack, to make color mixing less complicated, since it is much easier to mix/scale ½, to 1oz, of silicone at a time instead.

Thickened the stem to allow for easier insertion in to castings. Scaled to @ 38mm.