Fluxx Card Game Boxes

Replacement boxes for many editions of the card game Fluxx. This is not an original idea, I have just taken my favorite parts of several other creations and combined them with a couple tweaks that I found through printing them all.

The bottom part of the box has spacer bumps where the top slides on to provide more of a friction fit. Trim or sand these down to your desired fit. (Created by randerson_1983)

I found the box to be too tall overall and caused the cards to slide around when in my back, potentially popping the box open. I reduce the height of the bottom part by 7mm to fix this. You will find a 69mm tall and 76mm(original) variant in the files.

This post will be updated as I add more editions to my collection and find/create lids for them. If you create your own top/lid please let me know in the comments! Blank_Top_W.stl has been provided for you to use.

Files names follow this pattern:

Edition_Top/Bottom_CreatorInitial.stl

ex. Top_Pirate_W.stl

See credits for which Creator Initial is who. Edition names reference the official publisher names.

Credits

The original concept for these boxes comes from Wizzer2801 (W). Was then improved by randerson_1983 (R). And more lid variants were created by ScotchBunny (S) and BigRedCheese (B). BigRedCheese also created the original version for editions that include a coin.

https://www.thingiverse.com/thing:1573999

https://www.thingiverse.com/thing:4139169

https://www.thingiverse.com/thing:4825216

https://www.thingiverse.com/thing:2601512

Merging multiple items into 1 post for my future reference. Taking best parts of several remixes and combining. Adding lids of my own creation (adding appropriate symbols). Resizing bottom to better fit cards. Unified Naming Structure for editions.