Easter Bilby (no supports needed)

This is my contribution to the Easter bilby design project. 
 

Print size at 100% is approximately 120mm or about 4.7in. Can be scaled up or down. I've printed as small as 30% with 0.1 layer height. 

Printed on Ender 3v2 and Ender 2 Pro in PLA

Supports: no

Brim: no

Layer height: 0.2mm

Infill: recommend 10%

Pictured: chocolate bilby at 100%, painted and static flocked bilby at 60%, teeny orange bilby at 30%