MiniMax inverted amp mount bracket

This is a mount to allow the Down4Sound MiniMax amplifier to be mounted in an inverted fashion and show off its' guts. This mount will give about .050" clearance between the top of the amp and the mount surface, to allow for airflow.

 
I have included two versions.
For those that don't mind seeing the mount and want more strength select the mm_amp_mount2.stl file. Those that want a more sleek mount select the mm_amp_mount3.stl (this is the mount in the photos).

I printed the model in PETG with 4 vertical perimeters, 3 top and 3 bottom layers.

Infill was set to Gyroid and 20%

Once printed I tapped the non-tapered hole to a 10-32 thread and used some stainless steel hex screws to secure the amp to the mount.

The lower tapered holes were designed to fit a #6 screw to secure the mount.