Rivian R1T and R1S Center Console Camp Drawer Bolt-On (Mk4 Remix)

This 3D print model is a modified version of the original camp drawer design for the Rivian R1T and R1S center console. It has been adapted to fit the Mk4 printer bed.

Mk4 Compatibility: The camp drawer surround part has been adjusted to fit the dimensions of the Mk4 bed without altering the original design's functionality.

Printing Recommendations:

• Filament: A high-temperature resistant filament like ASA is recommended for its durability. The use of a high-quality brand is advised based on testing.
• Settings: 20 percent infill, 0.15mm layer height, and supports are recommended.
  • I used organic supports on the front model and snug supports on the surround model.
• When printing with ASA, a brim is recommended.

Assembly Parts Required:

• 6 M5x12mm countersunk screws
• 6 M5 hex nuts (Insertion may require some force or cutting excess filament)

1. Mk4 compatibility: trimmed the camp drawer surround part so that it can be printed on the Mk4 bed