Sugar Skull [4 parts]

Sugar skull in 4 parts for wall decoration and needs only 4 colours for easier print.

You can always scale the model in the same % for X and Y axis but leave Z at the current value.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

• PLA Ziro Black Transmission Distance: 0.5
• PLA Ziro Dark Gray Transmission Distance: 6.4
• PLA Ziro Light Gray Transmission Distance: 7.2
• PLA Ziro Snow White Transmission Distance: 8

Swap Instructions:

• Start with Black
• At layer #12 (1.04mm) swap to Dark Gray
• At layer #19 (1.6mm) swap to Light Gray
• At layer #28 (2.32mm) swap to Snow White for the rest.