Fridge door latch (to ensure closing the door)

Ever happened, a fridge/freezer door is left a unnoticeable open by accident. With this unit the final push is needed close the door fully otherwise the door will stay clearly open.

The Fridge_body should be mounted with the 2-side tape near the hinge and the Fridge_door part(s if two doors) on so that the body will slide nicely in.

No support needed. Ensure the middle (fridge_door) section released out from the bottom plate allowing to springs work (design has 0.3mm gap there) using e.g. xacto knife if needed.

Update: More solid door part