Bernina Sewing Machine Foot Holders

"BerninaFeet.stl" is a model for a Bernina Sewing Machine Foot Holder to hold 2 large and 2 small sewing machine feet.  "BerninaFeet2.stl" is a model for a Bernina Sewing Machine Foot Holder to hold 5 small sewing machine feet. My wife won't let me drill screw holes in her expensive sewing machine so we mounted using Scotch double-sided foam tape. These Holders can be mounted on your sewing machine or other desired surface. These holders are designed specifically for the newer style Bernina feet and will work on most Bernina sewing machines. Note: these have not been tested on the older Bernina feet and would love to hear feedback as to whether they work for them.

It prints perfectly fine without supports however there is a small improvement in print quality if using supports. If you do use supports, set supports to snug. I recommend printing with PLA with 0.15 or 0.16 layer height, 33% or higher infill, and 5 wall loops (keeps posts strong),  The Bernina logo is raised letters that can be printed as 1 color or 2 color.

If you would like other configurations besides these, leave me a comment and I'll try to accommodate.