Glove or Tissue Box Hanger

This two-piece mount is designed to be attached with magnets or screws. I created this box mount for larger glove boxes with end dimensions about 95x120mm. It also happens to perfectly fit a standard big Kleenex tissue box (in the USA at least).  Slots are available for 10x60x3mm bar magnets but you could certainly use multiple smaller magnets. There are also slots for M3 panhead or similar screws. If you use screws place them so that you can slide the mount pieces partway onto the box then mount the box by passing the screwheads through the large holes and then slide the mounts fully onto the box. That procedure should position the screw heads where they will hold the box in place. A vertical arrangement using screws can be done with the bottom mount screwed firmly in place leaving the top piece free to slide on and off as needed.