IKEA Skadis Wall Panel with standoffs, 6x6, 5x5, 4x4 holes and other sizes

IKEA Skadis compliant wall panel with 6x6, 5x5, 4x4 holes and other sizes.

The standoffs are 25mm. The front will be 30mm from the wall.

Mounted with 4x screws, ideall sunken head.

Print with 10% gyroid infill, 3 top, 3 bottom layers, 3 perimeters. This will give you decent stability and about 150g of filament usage per panel.

Let me know if you need other sizes, I will create them on demand and upload here.