Stealthburner LGX lite Mount with SB2209 (RB2040), Filament Sensor + Filametrix

I had to do some modifications to some existing models to build my Stealthburner with Filametrix filament cutter, Filament runout sensor, LGX lite and Bigtreetech SB2209 / RB2040 CAN Board.

Thank you to the work of https://www.printables.com/@DanielHasting_664593 and https://www.printables.com/@garethky_1988, I only did small changes. 

In order to get a full Toolhead you need…

• from the Filametrix Repo
  (https://github.com/sorted01/Filametrix/tree/main)
  • Printhead Front + Back (i used a Dragon HF)
  • Cutting Arm
  • Knife Holder

• From @gareth.ky's Stealthburner / LGX Lite / EBB2209 Remix (https://www.printables.com/model/437832-stealthburner-lgx-lite-ebb-2209-2240-remix)
  • Main Cover
  • Fan/Lights PCB Holder (to be mounted behind the parts cooling fan)
  • SB2209 PCB Holder  (to be mounted on the side of the LGX Lite)
  • Lever extender

• From my files
  • Extended Cable Bridge to hold BTT's CAN Cable
  • The two parts enclosing the LGX Lite (More Filametrix Lever room / changed heatset)
  • The Cover with increased clearance to make room for the bigger connectors of the RB2040

Assembly:

• Follow the FIlametrix Instructions in their Git Repo, for the Filament Sensor have a look in @DanielHasting_664593 original, you need a 6x3 magnet for the filament sensor with a standard microswitch
   

Daniel Hastings' Model:

• Modified the “feet” to make sufficient clearance for the filametrix lever to move freely
• Changed the hole for the screw holding the cover to a heatset-insert so that the cover can be screwed in from the outside.

Gareth.ky's Model:

• No changes to his files but uses parts of his model