40mL vials stand, sonicable

Laboratory stand for 40mL vials (cca 27.4 mm diameter), for use in ultrasonic bath.

Printed from PETG, 0.4 mm nozzle, 0.2 mm layer height, no supports.

Print 1x top, 1x middle (top and middle are identical), 1x bottom and 12 feet. Assemble by sliding the feet on the borders via corners, 2 feet per side. It can be a bit tricky to position the feet correctly, not upside down. When fully assembled and aligned, feet might be secured in place by thawing the ends a bit, e.g. with hot paperclip (Be careful, don't burn yourself, use appropriate means of personal protection ;-)).

I hope, you'll find the model useful :-)

If you'd need to adjust anything, there are SolveSpace files included.