hueforge pecco bagnaia

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA PolyTerra Lava Red Transmission Distance: 1
PLA PolyTerra Fossil Grey Transmission Distance: 2.2
PLA azurefilm White Transmission Distance: 3.7

Swap Instructions:
Start with Charcoal Black
At layer #7 (0.64mm) swap to Lava Red
At layer #10 (0.88mm) swap to Fossil Grey
At layer #11 (0.96mm) swap to White for the rest.

Slightly jagged wheel profile due to background removal