ac dc hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA PolyTerra Fossil Grey Transmission Distance: 2.1
PLA azurefilm White Transmission Distance: 3.7
PLA PolyTerra Lava Red Transmission Distance: 1

Swap Instructions:
Start with Charcoal Black
At layer #8 (0.72mm) swap to Fossil Grey
At layer #10 (0.88mm) swap to White
At layer #14 (1.2mm) swap to Lava Red for the rest.