Ford escort rs2000 Hueforge

Keep in mind that I used a really transparent ugly yellow filament so the model will probably look a little different if you have a proper yellow filament:) 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Orange Transmission Distance: 5
PLA Generic yellow Transmission Distance: 27
PLA Generic White Transmission Distance: 3

Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Orange
At layer #12 (1.04mm) swap to yellow
At layer #23 (1.92mm) swap to White for the rest.