Simple Key Hanger

This is a model of a key hanger. The hanger is very simple, and as such, it will match any interior decor. Thanks to the holes, it can easily be hung on the wall. If you want to avoid drilling, you can use double-sided tape. This is the largest possible size that can be printed in one piece on an MK4.

Recommended printing settings: 

Filament: PLA 

Brim: Not recommended 

Infill: 25% 

Nozzle: 0.4 mm 

Prusa Slicer: Basic settings 0.20 mm Speed

Printing time: 3h 55min