Filament Spool Rack
Filament Spool Rack for simple organizing of several spools.
35
104
0
1151
updated June 25, 2024
Description
PDFFilament Spool Rack
I've designed this filament spool rack to locate all the spools for our Prusa XL on one side. I've relocated one of the filament sensors to reduce the bowden length.
Some remarks
- There are two versions of the axle assembly. One with 608 bearings and one without. I found the solution without the bearing to be best.
- I suggest to use support under the axle cut-out track when printing the divider-plates.
Bill of Materials (BOM)
| TYPE | LOCATION | QTY |
|---|---|---|
| M5 x 12mm SHCS | Divider plates | 15-off |
| M5 Drop-In Nuts | Divider plates | 15-off |
| M3 x 15mm SCHS | Filament guide funnel | 5-off |
| M3 Drop-In Nuts | Filament guide funnel | 5-off |
| M5 x 25mm SHCS | Left- and right end plate | 6-off |
| M3 x 10mm FHSC | Rubber feet | 4-off |
| M3 Drop-In Nuts | Rubber feet | 4-off |
| 2020 Aluminium Extrusion (L = 470mm) | Frame | 3-off |
| ECAS04 Bowden Connector | Filament guide funnel | 5-off |
Part Descriptions
Tags
Model origin
The author marked this model as their own original creation.
