70mm EDF intake and thrust tube

70mm EDF housing and intake with a thrust tube. Exit diameter is 64mm and is 28mm long so it is optimal for a 70mm EDF.

Modelled around a QX motor 70mm 6 blade EDF. It should fit any EDF as long as its main body diameter is around 71-74mm. Anything less should be fine but won't be as efficient. Anything more and some sanding is required.

Based off a MiG-25 and F-15 style, meant to be used twice. 

To mount, the file can be edited or you could screw in some mounting points as it is thick enough for that, make sure to print with 2 walls and maybe 5% infill.