HYPERFORMA_Floatwheel ADV Pro Rail Guards - Split Design

Description

These parts part have an original design and were designed directly on the ADV PRO CAD model provided by Tony from Floatwheel.

It's a completely different design from the original Design by Tony fro the ADV Pro (wich are carbon fibers sheets to be allied on the side of the rails). Optimized for 3d printing, the external surface is completely flat, except for the logos.

The middle piece is available in 3 options:

• clean 
• compatible with the handle (no need to remove it) w optional cover
• w mounting holes fo the handle (mounted on the Railguards)

you can print what you prefer and choose for example a different solution between right and left.

I've designed the ADV Logo and HYPERFORMA Logo on the bottom of the print, no support is required for printing logos that lie on the side of the printing surface.

Double sided water resistant adhesive tape (like VHB 5952) is recommended to apply the guards on the rails. 

Triangular shapes are probably best suited for this design as they offer the greatest adhesion surface.

Every piece fits in a 220x220 mm build plate.

UPDATE 08/04/2024: Model “HYPERFORMA_Floatwheel ADV Pro Railguard_DX” fixed (triangles too high!)