Trimmed Flipper Zero Wifi Module Case

Slightly trimmed version of the original full case this is remixed from.
13
183
4
755
updated March 6, 2024

Model files

trim_base.stl
trim_base.stl
2 MB  |  March 6, 2024
trim_lid.stl
trim_lid.stl
1 MB  |  March 6, 2024

Model origin

The author remixed this model.

Differences of the remix compared to the original

Cut out some area around the reset and boot buttons to make them easier to press through the lid and trimmed the pin edge of the board to make it flush with the PCB and have better clearance with the official rubber case on the flipper zero itself.

License