A remix of the amazing Sick-60 design to support cherry-style stabilizers, re-designed completely in Fusion360. Now also including an angled version with a 5-degree incline.
The design is using the same dimensions as the Sick-60. The top parts of the case are modified and now use a plate design generated using this plate generator. This should make it easy to remix it and change the layout, for example to support arrow keys.
I also added a slightly angled version to improve the typing experience.
Print bottom-left-5degrees.stl and bottom-right-5degrees.stl for the combined models, or you can also print the regular flat bottom and then wedge-left-separate.stl and wedge-right-separate.stl. This allows you to mix and match the colors a bit and potentially create some cool designs.
Supports:
No
Resolution:
0.2
Infill:20
Notes:
No supports needed, print with 2 or 3 perimeters/walls and I'd recommend 3 top and 3 bottom layers
Post-PrintingThis design should work with most 60% PCBs, the one I used was the YD60MQ. Note that the layout in this design is the Pok3r layout (see pictures). It should be 2u left shift and 2.25u right shift, make sure you get the right PCB and keycaps.
I included the .hex file I used to flash the firmware as well as the configuration file for kbfirmware.com. Just import it and edit the keybinds the way you like!
Category: ComputerThe author marked this model as their own original creation. Imported from Thingiverse.