Metric Modular Filament Drawer System

Modular Filament Storage System based on the Design by @RCDIY_187541, modified to use Materials available in Europe, pleace check out the oritinal Model for detailed Information about this system and the Section below for what exactly changed compared to the original Design.

• uses GTV H45 PK-PRO Drawer slides like these: Amazon Link
• i replaced the PVC Pipe with 20mm “Rods”, you can used 20mm Wood dowels, or 20mm electrical Conduit you can find in any european hardware store
• reduced the width of the hole system by 6mm, so 254mm instead of 260mm, to make it fit smaller Beds like a Bambu X1, etc.
• moved the rods ~1mm further down to account for that 6mm less with change

I saw the very cool and Modular Filament Storage System yesterday but living in Europe the Imperial Material isn't available for me in Europe.

Luckily @RCDIY_187541 provided the Step files for remixing, so i went at it, here's whats different:

• uses GTV H45 PK-PRO Drawer slides like these: Amazon Link
• i replaced the PVC Pipe with 20mm “Rods”, you can use 20mm Wood dowels, or 20mm electrical Conduit you can find in any european hardware store
• reduced the width of the hole system by 6mm, so 254mm instead of 260mm, to make it fit smaller Beds like a Bambu X1, etc.
• moved the rods ~1mm further down to account for that 6mm less with change