Lost in Space Chariot /MINI-Z 4x4 Body

It is a part that remodels Kyosho's mini-z 4x4 into a Netflix version lost in space chariot with a 3D printer.
For assembly, please refer to the stl data and video in "sassembly_reference" in the zip file.

About screws
Please measure the thickness and length of the screws by referring to the 3D data of "assembly_reference_screws" in the zip file.
For reference, thick screws are M2.0mm and thin screws are M1.2mm.

We recommend using RGT tires.
Normal tires tend to interfere with the body.

Also, if you need updated parts for LED lights and roof racks, download them below.
https://www.printables.com/model/794638-lost-in-space-chariot-mini-z-4x4-update-parts
------------------------------
Reference of print settings

All parts are basically 3D printed with a layer height of 0.1 mm.

"Body_rear_detail_4-mesh_parts_white.stl" is output by processing gcode only the raft part of the slicer.
It is recommended to use an equivalent wire mesh etc. for this part instead of 3D printing.

"Glass.stl" is made by cutting a plastic plate with a thickness of 0.3 mm.