This is a remix of RobertCowanDIY's Modular Filament Drawer System to use hardware found at Bunnings hardware stores.
CAD file has been cleaned up to make it easier to modify yourself.
Printed with 2 walls, 5 top & bottom layers, and 20% gyroid infill.
Parts List:
Holman 15mm PVC
Goliath Soft Close Drawer Slides (or standard to save a few $)
6g x 16mm Wood Screws (for connecting modules, faceplates, middle supports. 20 required per module, additional for connecting modules together)
6g x 10mm Wood Screw (for connecting drawer slides, comes with the drawer slides)
Taskmaster 12.7 x 1.5mm Door Buffer (these are only used on the bottom unit as feet, optional)
235 x 19mm DAR Pine (used for the face, optional)
6g x 30mm Wood Screws (used to attach the handles when using 19mm wood)
Heat Insert Option:
Use this if your slides didn't come with the short wood screws.
M3x10mm BHSC
M3x5x4 Heat inserts
M3 washers, preferably 9mm OD (search M3 mudguard washer) - used if putting M3 into the larger holes.
Edit 2:
Added a faceplate that doesn't have holes for a cover, and a beefier front handle that uses that screws that come with the slides.
Edit 1:
I've uploaded frames that accept M4 or M5 as the screws that come with the rails are too long for the frames, ideal size is 8mm.
The author remixed this model.
Modified the original to better suit hardware found in Australia/New Zealand.