Radiomaster Pocket screen mount for Emax Transporter 2 FPV drone goggle monitor

Radiomaster Pocket screen mount for Emax Transporter 2 FPV drone goggle monitor.  Wanted to be able to use it on my radio as the goggles done work with my eyes.

Screen attaches with a standard ¼" tread 5/8" machine screw.  See the attached picture and grab one at the local Home Depot.  

To attach, put the bracket over the strap mount point on the centre or the radio at an angle.  Then push the back down until it clicks into place.  Remove but pulling the two clips at the back away from the radio.

Printing notes: Turn on Organic Supports and you should be good to go.  I put the perimeters up to 6 to make it extra strong.,

Hope you like it!