Triangle Labs Filament Sensor Bracket for Voron 2.4

This is for a bracket that positions the run-out sensor on the inside before the exhaust cover with a push through PTFE connector,  esentially ending on both sides.  One on this bracket and one on the exhaust cover thus keeping the PTFE from pulling out and less stress on the filament path.

I reworked the design to hang on the inside or ouside staight in or out in line with the exhaust block-off filament pass through.  Essentially it allows for a pass through PTFE connector on each side of the Triangle labs filament run-out sensor.  I placed it inside so that I can have less stress on the filament path however, it should work on outside as well.