Sheep Toiletpaper-Roll decoration

I've found various versions of this here in Thingiverse and at other places.

Most of them have strong parts, which is not necessary and use much to much filament and printing time.

So I decided to make my own from scratch. Result was a tiny "frame", a funny looking face (btw: do you know "Shirley" from "Shaun the sheep" ? ;-) ) and an easy assembly.

It is quite an easy print, it can be printed fast, and does not require much filament.

Of course it does NOT need supports.

Print Settings

Printer Brand:

Creality

Printer:

Ender 2

Rafts:

No

Supports:

No

Resolution:

0.2

Infill:

15%

Filament: Various PLA white and black

Notes:

Print the WHITEPARTS.stl in white PLA, and the BLACKPARTS.stl in black PLA. (there is one spare pupil provided, in case you lose one (I did...thats the reason for the spare one) :-)

Assembly :-)

Stick the legs in the holes of the C-shaped frame parts, then connect the two C-shaped parts with the beam. Make sure both legs face the front with their rounded surface.
Glue the white eyeball to the face, then glue the pupil to the eyeball.

Ready you are!

If you give it as a present, fix the toilet paper roll with a rubberband to the frame.

How I Designed This

I designed this in Tinkercad