5015 Hemera Fan Shroud with BLTouch bracket

Remix of Permanoobs Hemera 5015 Fan Shroud.

Features:

• Usage of a BLTouch / 3DTouch / TLTouch Autobedleveling Sensor
• No Restriction for warm exhaust air of the Hemera-Fan

• You can use 40x40x10 as well as 40x40x20 fans to cool the Hemera (I recommend SUNON maglev 40x40x20 fans) Material: PLA is okay, but due to the heat it would make sense to use PETG

  Layer-height: 0.20 is okay (I used a 0.5 nozzle without problems), but lower layer heights will make better fan shrouds.

  I use tree support, which works awesome on this model (Ultimaker Cura 4.7.0)

  The Offset position of the bltouch will be:
  X-24.50 Y-44.00 Z-0.95

  Update:
  V1 - known working version
  V2 - Larger Slots (+/- 1.5 mm vertical shifts possible) - Not printed - Please give feedback

  I added the Fusion 360 Archive, so that you can easily remix this part."V8" is basically the exported V2 stl.

  Print Settings

Printer Brand:

Creality

Printer:

Ender 3 Pro

No

Supports:

Yes

0.20

Infill:

Grid 20%