Sunlu S8 Legs Alternative

If you want to remove the integrated front case which includes the power supply, display and controller, you need a substitute leg to have the chassis leveled.

The legs alternative here uses the rubber feet and can use the original M5 screws and nuts to bolt them on.

Requirements:
M3 key
M5 screws and nuts from the original case.

Print:
No supports are needed, but print them on the back side laying on the bed.

Installation:
Use a long M3 "inbus" / allen-key and screw on the block on the frame first. You have reach through holes at the bottom.
Then screw on the black rubber feets.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3 Pro

No

Supports:

No

0.2

Infill:

25%

Notes:

Material doesn't really matter.