Multiboard Command Strip Mounting

Support me:

• Post a Make and Comment
• PayPal
• Venmo: @paulorfo
• Cash App: $paulorfo

-------------------------------------------

Keep Making has come up with an awesome mounting board that's seriously impressive. If you haven't heard of Multiboard yet, you need to check it out ASAP!

Their original design is cool, but I decided to tweak it a bit to better fit my needs. Initially, it had an 8mm gap between the tiles and the wall for running cables, but I changed it to just 2.6mm. This not only prints faster but also saves some filament.

Now, there are two versions you should know about: DUAL and QUAD.

For the DUAL version: it's for connecting two Multiboard tiles, and there's an A and a B version. A goes on the back of the tiles, where you stick the Command Strip, while B goes on the front for a nicer look. Just a heads up, they might look similar to the original design, but I based them on the CROSS Quad piece. So, make sure to download my versions (A and B), as they won't work with the regular "Dual Snap Connectors" and "Dual Command Strip Mount."
Check the pictures to understand the difference on the pegs.

As for the QUAD version: I've only uploaded the A version because that's the one I made changes to. You can grab the B version from here.

-----

OBS: Posted as original because I could only find the user on Printables, but not a Multiboard post.