GE Dryer / Washing Machine Dial Shaft Replacement

Our GE dryer's dial shaft split in two so I over-engineered a small part to fix it!

Printing Instructions

• Prints without supports with the small end on the build plate
• I printed mine with 0.2mm layer height
• PLA is fine

Installation Instructions

1. Remove the small metal pressure-fit crown from the inside of the original shaft
2. Cut the original dial's shaft flush with the sides with a Dremel or a similar tool (see pics)
3. Push the printed shaft in
4. Insert the small metal crown (extracted from the original shaft above) into the printed part
5. Install the dial on your dryer

The Fusion 360 source file is included.