Behringer MA400 Mount

Needed a way to mount the Behringer MA400 (and its knockoffs) near orchestra members either on a mic stand or the music stand without needing extra stands.

Supports are only needed for the bolted mount inside the hex area.

Hardware Needed:

• 2- M3 x 8mm pan head bolts (Behringer MA400)
• 2- Command strips (Mackie HM-4 or others without mounting holes)
• 1- 1¼" x ¼"-20 hex hex bolt
• 2- ¼"-20 hex nuts
• 1- ¼" washer
• 1- Adjustable Jaw clamp (https://www.amazon.com/dp/B09C3YVPV3?psc=1&ref=ppx_yo2ov_dt_b_product_details)

Assembly:

1. Print
2. Insert bolt through base
3. Place washer and tighten nut to base
4. Start other nut onto the bolt
5. Place jamb nut hand onto nut
6. Attach Adjustable Jaw Clamp
7. Move jamb nut/handle against clamp
8. Attach MA400 via screws or Command strips
9. Attach to mic stand or music stand
10. Adjust direction by loosening jamb nut and rotating base into desired position, retighten jamb nut.