Sovol SV07 Plus extruder wheel winder

Requires 1 of each model and 1 m3x10 to attach the winding knob to the wheel. Hole in the knob is small enough to lock the bolt at the tightness needed for it to wind easily but not be floppy. Fit on the initial version of the wheel to the extruder was a bit tight so I made it .05mm larger in the model, please let me know how the fit is for you.

All parts were printed in PETG, wheel with 3 perimeters and 15% infill, knob at 100% infill.