Fuji (Fujifilm) X-T20 grip, works on X-T10, X-T30 too!

The Fuji X-T10, X-T20 and X-T30 are great little cameras, but the grip is a bit small for larger hands: your pinkie has no-where to go except under the camera.  This newly updated grip provides full support for all of your fingers, yet doesn't block access to any of the camera buttons and controls.

This grip also has an “Arca-Swiss” compatible feature on the bottom, you won't need to screw into this to attach to your quick-mount tripod.  In case you DO want to use a conventional screw-type mount, I've incorporated a hole in the bottom into which you can heat-insert (with a soldering iron) a standard ¼-20 threaded insert.

One photo shows the insert in place.  A suitable heat insert can be bought from here: https://www.amazon.com/dp/B08VGTS2D5

You will need a ¼-20 x 3/8" slotted head (or Philips) screw to attach this grip to your camera. Alternatively you can use this specialty screw, no tool required (also shown in one of the photos): https://www.amazon.com/dp/B00KI3J7G2

Printing is easy, 20% infill is fine.  I used black PLA but it's up to you.  Bambu Studio says there are “manifold” issues, you can ignore this or you can let Bambu Studio fix it.  it prints fine either way.

One note, you won't need to use supports – there's a designed-in easy break-away support on the bottom for the large screw recess.  Once it's printed, simply break it off with a pair of needle nose pliers.

Three versions are provided, one with a smooth surface, one with a 3-d printed textured area in the front, one with a recess for stick-on rubber grip.  Photos shown of all three.  You can purchase the rubber grip material: https://www.amazon.com/dp/B0CM5PB8Q9

If anyone wants one made for you, I will provide a ready-to-use unit with the 3d printed grip, threaded insert, laser-cut textured rubber pad and special screw for $10 plus postage.  Just message me through this site.  This is NOT a money-making endeavor, just covering my costs (If Prusa wants me to pull this offer, I will.)

Enjoy, let me know how it works for you!

This is an almost full re-design of the grip by Greg Beeke.  I have elongated it to cover the full bottom of the camera, softened many sharp edges, improved the grip shape for comfort, allowed better access to the buttons and added a hole for future installation of a heat-stake ¼-20 thread insert.